Einhell Fertilizer Spreader GE-US 18 Li-Solo
Quick & Easy Application
Environmentally Safe
Long-Lasting Results
The Einhell Universal Spreader GE-US 18 Li makes many jobs in your garden or outdoor spaces a lot easier. Whether for fertilizing, sowing seeds or spreading de-icing salt in winter. As a member of the Power X-Change family, the spreader is powered with an 18 V system battery, which can be used in all Einhell devices in this range. The 6-level electronic speed control and the 8-level, ergonomic spreading volume control deliver perfectly dosed spreading performance. The container has a capacity of 3.3 liters. The spreading width is individually adjustable and can be set to a maximum of five meters, which corresponds to a coverage of approx. 15 square meters. The softgrip handle makes working ergonomic. The Einhell Universal Spreader GE-US 18 Li can be used to spread fertilizer, lawn seed or de-icing salt efficiently and easily. This means that this handy helper can be used all year round! The product is supplied without batteries or a charger. These are available separately, for example as an Einhell PXC starter set.
Member of the Power X-Change family, 1x18V battery necessary
Einhell Fertilizer Spreader GE-US 18 Li-Solo
DO YOU HAVE A PROBLEM WITH A LEAKING EARTHEN DAM OR POND?
DamIt™ Dam Sealer is an advanced, non-toxic, polymer powder which can be used to seal leaking dams and ponds. The polymer is applied to a leaking dam or pond by scattering the powder across the surface of the water.
DamIt™ Dam Sealer allows you to:
- Fix your leaking earthen dam or pond
- Easily apply directly to the water surface
- No need to drain water or empty the dam
- No need for expensive earth moving equipment
- Fix it yourself as DamIt creates a permanent seal
HOW IT WORKS ?
DamIt™ Dam Sealer is designed with a positive charge which draws it downward through the water toward the bottom of the dam or pond. The water pressure (hydrostatic pressure), which causes the dam or pond to leak, forces the polymer down into cracks and crevices as it sinks to the bottom of the pond or dam.
Once activated with water, the polymer will expand in size and bind to other polymer particles to form larger groups of particles, which effectively slows and stops the leak. The polymer will continue to expand over several hours and forms a flexible plug that withstands water pressure.
The positive charge of the particles will also attract any silt and suspended matter in the water downward to the bottom, which acts to embed the polymer within the soil structure and minimise any disturbance or movement of the polymer that may be caused by future water inflows.
LONG TERM SEAL
DamIt™ Dam Sealer is insoluble and will form a long-term plug, in cracks and porous soils. The polymer stays active when wet and can withstand continuous wet/dry cycles to accommodate rising and falling water levels due to seasonal water level variations in the dam or pond.
DamIt™ Dam Sealer is a rapid, cost effective solution for sealing water leaks and does not require earthmoving equipment or the emptying of dams and ponds; allowing you to save valuable water and keep the dam or pond in use while repairs are undertaken.
DamIt™ Dam Sealer works on a wide range of soil types; from clays to sandy loams and in a wide range of water types; from clear, pure drinking water through to saline water with high levels of suspended clays typically found in rural stock dams.
Before
After
TECHNICAL DATA
The polymer is approved for use with potable water and is not toxic to humans, fish, aquatic plants or animals.
DamIt™ Dam Sealer will eventually break down to form a harmless mix of water and carbon dioxide over time.
- Rural and Farm Dams
- Garden or Park Ponds
- Golf Courses
- Levee Banks
- Irrigation channels
- Storm-water Channels
- Artificial Wetlands
- Storage Reservoirs
- Water Features
- Tailings Dams *
* Not suitable for highly acidic or alkaline tailings
DamIt™ Dam Sealer is applied over the surface of the dam/pond at a rate of 1 litre of DamIt™ Dam Sealer powder per 10 square meters (or 107 square feet) of dam.
If you have obvious signs of the leak (e.g. wet walls or water trickling out of ground), or you feel you know the general area causing the leak then DamIt™ Dam Sealer can be applied just to those areas of the dam/pond and a smaller amount of DamIt™ Dam Sealer will be required.
Allow 1 x 15ltr pail per 150m² (1600 sq ft) of surface area.
One application is normally sufficient to stop leaks permanently.
DamIt™ Dam Sealer is applied over the surface of the dam/pond at a rate of 1 litre of DamIt™ Dam Sealer powder per 10 square meters (or 107 square feet) of dam.
If you have obvious signs of the leak (e.g. wet walls or water trickling out of ground), or you feel you know the general area causing the leak then DamIt™ Dam Sealer can be applied just to those areas of the dam/pond and a smaller amount of DamIt™ Dam Sealer will be required.
Allow 1 x 15ltr pail per 150m² (1600 sq ft) of surface area.
One application is normally sufficient to stop leaks permanently.
DamIt™ Dam Sealer will then expand into these areas and bond with the soil and clay to form a barrier and plug the leaks, effectively stopping any further water loss.
DamIt™ Dam Sealer is applied over the surface of the dam/pond at a rate of 1 litre of DamIt™ Dam Sealer powder per 10 square meters (or 107 square feet) of dam.
If you have obvious signs of the leak (e.g. wet walls or water trickling out of ground), or you feel you know the general area causing the leak then DamIt™ Dam Sealer can be applied just to those areas of the dam/pond and a smaller amount of DamIt™ Dam Sealer will be required.
Allow 1 x 15ltr pail per 150m² (1600 sq ft) of surface area.
One application is normally sufficient to stop leaks permanently.
Damit is not suitable for the following applications
- Ponds made from fibreglass, plastic, rock or concrete – Damit is designed for earthen ponds only
- Ponds with rubber or PE liners – Damit may work if you have a layer of clay/silt over the liner, but ideally Damit needs to be able to freely percolate into the soil
- Small and/or shallow ponds – Damit expands significantly after application
- Streams, water features or moving water – Damit is designed for still ponds and dams
- Heavily planted ornamental ponds with reeds and grasses – Damit will attach to vegetation
- Fish or aquaculture ponds – Damit is not toxic to fish but care should be taken to apply Damit in stages where fish are present to minimise any impact
Note: Damit will reduce soil porosity but it is not a cure-all and we cannot guarantee use of this product will stop your leaks
Hear from
Happy Customers
Discover more in our FAQ
Do I need to drain my dam or pond before applying DamIt™?
No. DamIt™ is designed to be applied directly to the water surface, so there is no need to drain the dam or pond. This makes the repair process faster, easier, and more cost-effective.
How does DamIt™ stop leaks?
The polymer carries a positive charge, allowing it to move downward through the water toward cracks and crevices in the dam floor. Once it contacts water and soil, it expands and binds together to create a durable, flexible plug that seals the leak.
How long does it take for DamIt™ to work?
DamIt™ begins expanding immediately once it contacts water. The expansion process continues for several hours as the polymer forms a strong seal within cracks and soil structures.
Is DamIt™ safe for animals and drinking water?
Is DamIt™ safe for animals and drinking water?
Will DamIt™ work on different soil types?
Yes. DamIt™ is effective across a wide range of soil types including clay soils, sandy loams, and mixed soils, making it suitable for many dam and pond conditions.
