Shalex Glaze is a high-performance water based clear sealer designed to enhance and protect a wide variety of porous surfaces on both residential and commercial projects. Glaze is a new generation coating providing the performance benefits normally only found in commercial sealers in a ‘user friendly’ water-based product.
Glaze is especially suited to sealing and protecting porous horizontal masonry surfaces such as clay, concrete and brick pavers, sandstone and concrete.
Glaze’s low odour, rapid dry and unique self-cross linking formulation make it ideal for sealing and protecting a wide range of interior surfaces such as interior bricks, blocks, stone and timber.
Based on a self-cross linking nano-polymer, Glaze has excellent early resistance to water whitening and when cured will remain clear even when submerged under water for extended periods.
Glaze dries to a mid-sheen finish and provides a smooth washable surface, that reduces dust and protects from stains, spills and reduces the ability of moulds, algae and lichen to discolour the surface. Glaze can be over painted with any acrylic water-based paint.
Glaze is a UV stable pure acrylic designed to provide many years of service in the harshest conditions. It is safe to use, has a low VOC formulation exceeding all environmental regulations and is very low odour making it ideal for application in enclosed spaces or for those with sensitivity to harsh chemicals and odours.
With the applicator in mind, Glaze is quick drying and provides for ‘wet on wet’ application. It has excellent resistance to alkaline substrates allowing for application over ‘hot’ concrete well before traditional coatings could be applied. Being a water-based coating Glaze can also be applied over damp concrete. Higher sheen levels can be achieved by applying additional coats giving the applicator greater flexibility to achieve the perfect finish.
Click on the image above to view our Glaze videos...
Trials have shown Glaze has excellent chemical, alkaline and efflorescence resistance and making it ideal for sealing and protecting floors and paths. Glaze is non-yellowing and enhances colour and substrate appearance.
Glaze may be used both on indoor and outdoor surfaces with confidence.
Hot surfaces may cause Glaze to dry prematurely. We recommend applying the first coat when the temperature is below 25°C to allow penetration into the substrate before drying occurs.
Alternatively, wash down the surface and apply Glaze while the surface is still damp (but not visibly wet).
Multiple coats of Glaze may be applied but drying time for each coat will increase. Do not leave for extended periods between coats as this may increase this risk of adhesion failure as Glaze cures and fully hardens over 48 - 72 hours.
Glaze is not suitable for exterior timber exposed to sun and rain eg. decking, as movement may cause cracking and lead to delamination of coating.
Glaze is not suitable for application over plastics, aluminium, porcelain, glazed tiles or natural stone
Glaze is not suitable for application over previously sealed concrete, e.g. stencilled concrete. Most driveways are sealed with a 'wet-look' solvent based sealer and these sealers are not compatible with Glaze as the solvents may prevent adhesion, curing and cross linking, even after many years.
Fibre cement sheeting
Concrete tilt panels
Clay, brick and concrete pavers
Undercoats / sealer
Concrete & terracotta roof tiles
Terracotta pots and ornaments
Timber (*not suitable for exterior decking applications)
Plywood, MDF & particle board flooring
No. of coats:
2 - 3
1L = approx 5m²
2 - 4 hours
When wet – Water | When dry: Solvent
12 - 18 months
10°C - 35°C
Low pressure sprayer, brush, lambswool pad or roller
Customers are advised to consider the information in this data sheet in the context of how the product will be used, including surfaces and any other products used. The information provided in this data sheet represents our best scientific and practical knowledge. Any advice, information or assistance provided by Shalex in relation to its products is given in good faith, however, is provided without liability or responsibility. Due to the wide variety of site conditions we are unable to assume liability for any loss that may arise from the use of our products. The user is responsible for checking the suitability of products for their intended use.
Glaze is a water based membrane and not classified as a dangerous good for transportation. We can ship this product to all areas via postal services and have express courier options for selected locations. Add this product to your cart and use the estimate shipping and tax feature to view shipping charges to your location.
No information available